logo

Máy đo DO/BOD hoặc pH hoặc ORP hoặc độ dẫn (MultiLab 4010-1) YSI

Tình trạng: Liên hệ
Đơn vị: Chiếc
Giá bán lẻ: Liên hệ.
Số lượng
Chia sẻ:

Laboratory instrument for DO/BOD, pH, ORP, and conductivity measurement. EPA approved for drinking water and wastewater compliance reporting.

Connect digital IDS sensors to the MultiLab 4010-1 for the measurement of DO/BOD, pH, ORP, and conductivity.

The YSI MultiLab line includes the 4010-1 (single channel), 4010-2 (dual channel) and 4010-3 (three channel) instruments providing easy to use and calibrate menu-driven operation ideal for the laboratory. All MultiLab instruments can accurately measure pH, ORP, conductivity, and DO/BOD. ISEs can also be connected to two and three channel instruments.

Please visit the MultiLab Kits page for fully assembled systems.

Features of the MultiLab line:

  • Input for pH, ORP, DO/BOD, or conductivity sensors
  • ISEs with BNC connection can be connected to the MultiLab 4010-2 and 4010-3 with an adapter (108132Y) that converts one digital input to an analog BNC input (i.e. only one ISE can be connected)
  • Data storage - 500 data sets in manual mode and 5,000 (MultiLab 4010-1) or 10,000 (MultiLab 4010-2 and 4010-3) data sets in automatic logging mode
  • Large, easy to read graphic display
  • Color screen and antibacterial keypad on MultiLab 4010-2 and 4010-3 instruments
  • Intelligent, digital sensors - plug and play connectivity
  • GLP traceability (sensors store serial # and calibration data)
  • USB connectivity to manage data; USB cable included
  • PC software included for easy data transfer
  • Durable electrode stand included
  • 3-year warranty

Intelligent Digital Sensors (IDS)

The IDS sensors automatically store their unique serial number and calibration data. In addition, they also digitally process the measurement signal. The sensors can be moved from instrument to instrument and maintain their calibration data and transmit this information to the new instrument.

  • Plug and play connectivity with each instrument
  • IDS senors store their own unique ID with serial number and calibration data
  • Digital sensor recognition, processing and data transfer
  • Includes self-stirring BOD, pH, ORP and conductivity sensors
  • BOD probe uses optical dissolved oxygen technology and includes a guarded sensor tip

EPA Approved Methodology

The MultiLab 4010-1 can be used with the IDS OBOD probe for wastewater compliance reporting of BOD and CBOD. Available IDS pH and conductivity sensors can also be used for drinking water and wastewater compliance reporting. 

Continuous Measurement Control (CMC)

The CMC function displays continual monitoring of the sensor's measuring range. The range is represented with a bar and calibration points are shown as vertical lines at the cal point. A moving cursor shows the current measured value and indicates if the measurement is within the calibrated range.

Quality Sensor Control (QSC)

The QSC is a system to monitor the condition of the pH electrode. An initial calibration is performed and, afterwards, the sensor status is monitored and graphically displayed over time.


You may be interested in downloading the YSI pH Handbook - a practical guide to pH measurements in the lab and field. It's full of tips and recommendations for ensuring accurate, repeatable pH measurements.

Sản phẩm cùng loại